usla.blogg.se

Ftp client for windows 10 galaxy
Ftp client for windows 10 galaxy










ftp client for windows 10 galaxy ftp client for windows 10 galaxy

tftp 192.168.0.2 get ĭownloading the file from the remote TFTP server. Download the file on the PC to the switch.You can find the vrpcfg1.zip file in D:\TFTP on the PC. Uploading the file to the remote TFTP server. tftp 192.168.0.2 put vrpcfg.zip vrpcfg1.zip Upload the configuration file vrpcfg.zip to the TFTP server (PC) and save the file as vrpcfg1.zip.Run the tftp tftp-server put source-filename command to upload the required file to the TFTP server (PC) or run the tftp tftp-server get source-filename command to download the required file from the TFTP server to the switch.For details, see "PC Functioning as an FTP Server". Connect the TFTP server and the switch, and configure IP addresses for them.binary //Set the file transfer mode to binary.ġ50 Opening ASCII mode data connection for .įTP: 93832832 byte(s) received in 722 second(s) 560.70byte(s)/sec. # Download the latest version of the system software to the switch.You can find the vrpcfg.zip file in D:\FTP on the PC. # Upload the configuration file to the FTP server (PC).ġ50 Opening ASCII mode data connection for vrpcfg.zip.įTP: 8174 byte(s) sent in 0.099 second(s) 82.56Kbyte(s)/sec.Run the put command to upload the required file to the FTP server (PC) or run the get command to download the required file from the FTP server to the switch.User(192.168.0.2:(none)):user //Enter the FTP user name user.Įnter password: //Enter the FTP password huawei. Log in to the server (PC) from the switch using FTP.For an indirectly connected network, ensure that there are reachable routes between the FTP server and client. The direct connection mode is used as an example here. The preceding information indicates that the switch and FTP server can communicate properly with each other. PING 192.168.0.2: 56 data bytes, press CTRL_C to break Check whether the switch and FTP server are connected.If a fixed switch uses VLANIF 10 to connect to the FTP server through GE0/0/1, the configurations are as follows: system-view Connect the FTP server to Ethernet0/0/0 of the switch using a network cable.












Ftp client for windows 10 galaxy